MS-1 : 3Hp CE – 2 speeds
Because two speeds are better than one ...
The MS-1 3hp CE provides a longer life capacitor, a sealed bearing and Gecko’s high-quality universeal, there is no doubt this pump could be any hot tub’s best friend.
- FRAME IEC 90
- 3HP 220-240V 50Hz
- Hmax: 24.2 PSI /17 Head M – 5.26 PSI / 3.7 Head M
- Qmax: 257.25 GPM / 975 LPM – 125.4 GPM / 475 LPM
- Longer life capacitor with high temp. 85°C
- High ambient temperature run rated 50°C
- Insulation Class F thermally protected (155°C)
- Maximum water temperature 50°C
- High speed: PSC
- Low speed: Starting Resistor
- 60 mm (2”) intake and discharge
- CE compliant
- AS/NZ Certificate
- No: SAA-201866-EA
- IPX5 enclosure
- Sealed bearing
- Seal: Gecko high-quality Universeal
- 2x white 60 mm (2”) union nuts with 60 mm slip tail pieces and O-rings
- Three wing nut drain plugs
- 2.4 m (96”) cable with AMP plug
- Standard wet end position 12 o’clock
- Rubber anti-vibration mounts (4)
Performance curves
Dimensions
Documentation
Discover everything about the MS-1 3hp CE - 2 speeds
